Support for Winspect Data Acquisition
Welcome to UTEX Scientific support, your technical resource gateway. You can search all support resources or concentrate on a particular product or area.

Show resources for a specific product:
Show only specific category:
Show: All   Downloads   Knowledge Base   White Papers   Product Documentation
Search for:
Entries 1 to 30 of 46
<<first <previous next> last>>
ResourcePublished
User Manual for Acquisition Logic AL8xGTe Digitizers
This page contains a Quick Start Guide and a User manual for Acquisition Logic digitizer models AL8xGTe
» Support » Product Documentation » Manuals
2018/11/06
08:11:00 PM
Programmer Manuals for Acquisition Logic Digitizers
This page contains a programmer manuals for Acquisition Logic digitizers using .NET 2.0 and later drivers.
» Support » Product Documentation » Manuals
2018/11/06
08:04:40 PM
Encoder Interface Cable for Acquisition Logic /OKOS Digitizers
This page contains a user manual for the internal ribbon cable interfacing quadrature encoder or step / direction motion signals to OKOS/Acquisition Logic digitizer boards.
» Support » Product Documentation » Manuals
2018/11/06
03:37:20 PM
Winspect7_64 8.0.2.140 (64 bit)
Winspect7 build: Version 8.0.2.140 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2016/10/20
07:00:25 AM
User Manual for Acquisition Logic AL12250 Rev 2 Digitizer
This page contains a Quick Start Guide and a User manual for Acquisition Logic digitizer model AL12250 Rev 2
» Support » Product Documentation » Manuals
2016/10/13
12:01:47 PM
HASP Drivers for Windows 7, 8 10
HASP driver set for Windows 7,8, and 10 (For new USB Keys on any supported ) Win32 and Win64 Supported
» Support » Downloads » HASP Software Protection
2016/07/22
04:32:58 PM
Winspect7 Build 8.0.1.87 (32 bit)
Winspect7 build: Version 8.0.1.87 (32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2015/02/20
05:30:03 PM
Winspect7_64 8.0.1.87 (64 bit)
Winspect7 build: Version 8.0.1.87 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2015/02/20
05:26:30 PM
Windows Upgrade Assessment
Windows Upgrade Assessment to help you assess the future of your Windows XP-based UTEX inspection system.
» Support » Knowledge Base » Hardware Support
2014/10/23
10:47:59 AM
Utex Windows XP Support Notice
Your UTEX system PC is an industrial controller that hosts specialized components for motion control and high speed data acquisition. It should not be upgraded before contacting UTEX technical support for advice.
» Support » Knowledge Base » Hardware Support
2014/10/23
10:43:56 AM
Winspect7 Build 7.3.2.146 (32 bit)
Winspect7 build: Version 7.3.2.146(32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2014/10/21
02:31:26 PM
Winspect7_64 7.3.2.146 (64 bit)
Winspect7 build: Version7.3.2.146 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2014/10/21
02:25:25 PM
Winspect7 7.3.1.144 (32 bit)
Winspect7 build: Version7.3.1.144 (32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2014/10/16
02:42:55 PM
Winspect7_64 7.3.1.144 (64 bit)
Winspect7 build: Version7.3.1.144 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2014/10/16
02:41:54 PM
Winspect7_64 7.3.1.134 (64 bit)
Winspect7 build: Version7.3.1.134 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2014/01/31
04:15:14 PM
Winspect7 Build 7.3.1.134 (32 bit)
Winspect7 build: Version 7.3.1.134(32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2014/01/31
04:05:30 PM
User Manual for Acquisition Logic AL12200 Digitizer
This page contains a Quick Start Guide and a User manual for Acquisition Logic digitizer AL 12200
» Support » Product Documentation » Manuals
2013/02/12
02:40:27 PM
Winspect7 7.2.1.255 (64 bit)
Winspect7 build: Version 7.2.1.255(64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2012/08/20
09:23:32 AM
Winspect 7 Build 7.2.1.255 (32 bit)
Winspect 7 build: Version 7.2.1.255 Beta (32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2012/08/20
09:17:24 AM
Gage Compuscope Drivers ver 4.20
Downloadable Windows Installer package containing drivers for Gage CompuScope Drivers ver 4.20
» Support » Downloads » Drivers
2012/08/15
07:13:04 PM
Resolving Winspect time-out error for Galil DMC 18xx motion controllers
Winspect 5.5 and 6.x scanning systems using Galil DMC 18xx controllers may report a time-out error from the Galil motion controller during scanning. This note describes how to configure the Galil DMC drivers to eliminate the problem.
» Support » Knowledge Base » Hardware Support
2012/08/13
09:35:46 AM
Winspect7 Beta 7.2.1.242 (64 bit)
Winspect7 interim build: Version 7.2.1.242 (64 bit)
» Support » Downloads » Maintained Builds (64 bit)
2012/06/01
10:30:25 AM
Winspect7 Build 7.2.1.242 Beta (32 bit)
Winspect7 build: Version 7.2.1.242 Beta (32 bit)
» Support » Downloads » Maintained Builds (32 bit)
2012/01/20
05:23:10 PM
Hardware Drivers for Winspect 6.x versions
This article lists the appropriate drivers for popular motion control and instruments hardware running under Winspect 6.x and Windows XP operating systems.
» Support » Knowledge Base » Hardware Support
2010/12/23
05:04:27 PM
Winspect 6.0.25.153 full installation program
Full Wispect 6.0.25.153 Installer package
» Support » Downloads » Installers and Service Packs
2009/11/18
02:24:25 PM
How to run Winspect and InspectionWare on the same computer
This document describes how to setup your workstation to run Winspect and InspectionWare on the same computer.
» Support » Knowledge Base » Application Notes
2009/10/14
02:10:10 PM
Acquisition Logic .NET Drivers for Winspect
Downloadable Windows Installer package containing Acquisition Logic .NET Drivers for Winspect
» Support » Downloads » Drivers
2009/10/14
02:07:22 PM
Galil Motion Control DMCSETUP
DMCSetup.exe is Galil's utility to manage the base settings of a Galil DMC controller. It has functions to upload and download, parameters, and burn default settings to the EEPROM on the controller.
» Support » Downloads » Galil Motion Control Utilities
2008/01/23
04:58:04 PM
Galil Motion Control DMCTERM
This is a simple terminal program to test and Galil controller functions, including any local programming for the controller.
» Support » Downloads » Galil Motion Control Utilities
2008/01/23
04:55:05 PM
Galil Motion Control drivers
Install just the Galil drivers and .dlls
» Support » Downloads » Drivers
2008/01/23
04:52:46 PM
Galil Motion Control DMCWIN32
DMCWIN.EXE is a communication utility including DLLs for developing Windows programs, a Windows based terminal for communication, and source code examples in C++ and BASIC.
» Support » Downloads » Galil Motion Control Utilities
2008/01/23
04:49:44 PM
PCUS 11 drivers for Windows 2000 and XP
» Support » Downloads » Drivers
2008/01/23
04:28:17 PM
Winspect Release 6 Reference Guide
Downloadable Reference Guide for Winspect Release 6
» Support » Product Documentation » Manuals and Training Materials
2008/01/23
04:19:35 PM
Pre Windows XP-Service pack 2 Hardlock Key Driver
Pre XP-Service pack 2 Hardlock Key Driver (older drivers/Parallel Keys/ self-installing)
» Support » Downloads » HASP Software Protection
2008/01/23
04:04:16 PM
HASP Setup program
HASP driver set (For new USB Keys on any supported OS & for old Parallel Keys on Windows XP SP 2) Win32 and Win64 Supported
» Support » Downloads » HASP Software Protection
2008/01/23
03:54:20 PM
Assembly Diagram for NI 6601 Cable Assembly (UTEX Part # AY13-072-001)
» Support » Knowledge Base » Application Notes
2008/01/23
03:18:40 PM
Backing Up the Winspect System
It is a good practice to back up your Winspect system on a regular basis. This protects you against accidental file deletions, and against computer-related disaster, such as hard-drive failures, water or fire damage, and so on...
» Support » Knowledge Base » Application Notes
2008/01/23
01:29:02 PM
Using Phoenix Contact Optima MD/100 Interconnect Modules
The Phoenix Contact Optima MD/100 module provides a convenient field termination for motion control signals that are interfaced to a Galil motion control card, such as the DMC 1700 and DMC 1800 series...
» Support » Knowledge Base » Application Notes
2008/01/23
01:10:46 PM
Ways to to use motor controllers and encoder interface cards for scanning
Winspect and InspectionWare can be configured in many different ways to collect NDT data.
» Support » Knowledge Base » Application Notes
2008/01/23
01:03:25 PM
Adding a pre-trigger enable output to the Sonix STR81G digitizer
Instruments with uncertain trigger timing -- Some ultrasonic systems when externally triggered are not immediately able to generate their main output pulse. These systems include flaw detectors with trigger jitter, multiplexers that need to first switch to the next channel and EMAT systems that first need to build up energy....
» Support » Knowledge Base » Application Notes
2008/01/23
11:21:07 AM
Adding a pre-trigger enable output to the Sonix STR8100 digitizer
Instruments with uncertain trigger timing -- Some ultrasonic systems when externally triggered are not immediately able to generate their main output pulse...
» Support » Knowledge Base » Application Notes
2008/01/23
11:12:31 AM
Winspect Release 6 Product Manual
Downloadable product manual for Winspect Release 6
» Support » Product Documentation » Manuals and Training Materials
2008/01/18
04:03:16 PM
Winspect Transducer Characterization product Manual
» Support » Product Documentation » Manuals and Training Materials
2008/01/18
04:01:00 PM
Microsoft .NET 1.1 Framework
A complete install package containing Microsoft .NET 1.1 Framework
» Support » Downloads » Windows Components
2008/01/17
04:01:26 PM
Microsoft .NET 2.0 Framework
A complete install package containing Microsoft .NET 2.0 Framework
» Support » Downloads » Windows Components
2008/01/17
03:47:19 PM
Manual Scanning Modes
An illustrated guide to manual scanning modes supported by Winspect and InspectionWare
» Support » Knowledge Base » Application Notes
2007/12/07
02:54:17 PM
 
  Print Email page Share