Support By Product
Welcome to UTEX Scientific support, your technical resource gateway. You can search all support resources or concentrate on a particular product or area.

Show resources for a specific product:
Show only specific category:
Show: All   Downloads   Knowledge Base   White Papers   Product Documentation
Search for:
Entries 109 to 138 of 161
ResourcePublished
InspectionWare Developer Installer Tool release 7.3.1.100 D
A utility that allows a developer to modify the InstallInpecionWare.exe file. The embedded IWSetup.ini can be modified or created using this tool. In addition, the icons for the application can also be replaced.
» Support » Downloads » Installers and Service Packs
2013/08/27
10:48:05 AM
User Manual for Acquisition Logic AL12200 Digitizer
This page contains a Quick Start Guide and a User manual for Acquisition Logic digitizer AL 12200
» Support » Product Documentation » Manuals
2013/02/12
02:40:27 PM
How to use the SP1 and SP0 commands to turn a UT340 ON and OFF
This article describes how to control the UT340's low voltage power supply power, using the SP1 and SP0 commands sent via RS232 interface. Also described is the method for recovering from an error state.
» Support » Knowledge Base » Hardware Support
2012/11/19
08:05:34 PM
Gage Compuscope Drivers ver 4.20
Downloadable Windows Installer package containing drivers for Gage CompuScope Drivers ver 4.20
» Support » Downloads » Drivers
2012/08/15
10:13:04 PM
Resolving Winspect time-out error for Galil DMC 18xx motion controllers
Winspect 5.5 and 6.x scanning systems using Galil DMC 18xx controllers may report a time-out error from the Galil motion controller during scanning. This note describes how to configure the Galil DMC drivers to eliminate the problem.
» Support » Knowledge Base » Hardware Support
2012/08/13
12:35:46 PM
Acquisition Logic .NET Drivers 2.3.35 for InspectionWare versions 7.3.0.4 and Later
updated from AlNet 2_3_27 with bug fixes for AL8100-4C
» Support » Downloads » Drivers
2012/07/11
06:44:14 PM
CINDE 2012 Advancements in Automated Inspection Systems for CANDU Steam Generators and Similar Heat Exchanger Tubes
In 2011 Babcock & Wilcox Canada Ltd. undertook a modernization program for their TRUSTIE steam generator inspection systems, to meet the evolving needs of their customers. A major challenge was to miniaturize the original TRUSTIE motion control, motor drive, and instrumentation systems, so that they could be relocated within the containment building and operated remotely via fibre-optic Ethernet interface. The new control systems and software had to maintain complete compatibility with the original TRUSTIE mechanical systems. This paper will discuss the challenges involved in the development of this novel system. Examples will be given from the new system’s first deployment to inspect steam generators at Bruce Nuclear Generating Station A during a planned maintenance outage in early 2012.
» Support » White Papers
2012/06/22
02:55:36 PM
InspectionWare maintained build downloads
InspectionWare builds maintained for specific customers.
» Support » Knowledge Base » Software Support
2012/04/24
02:17:49 PM
Customizing motion axis behaviour under manual control
This note describes how to use some of InspectionWare's features to customize how a machine behaves when it is under manual control. Examples include settings for motion with incremental speeds or fixed speeds, and how to configur the behaviour of the user controls to command motion for only as as long as the control button is depressed.
» Support » Knowledge Base » Application Notes
2012/03/15
06:38:49 PM
NI USB-6008 used with EC Instrument
Most of Eddy current instruments can output its real and imaginary data via two analog outputs. Using a simple A/D device such as NI USB-6008, one can easily interface an Eddy Current instrument in InspectionWare
» Support » Knowledge Base » Hardware Support
2012/02/01
12:05:28 PM
TOF Peak Interpolation for Precise Distance Measurements
You don't always need the world's fastest digitizer to get excellent distance resolution.
» Support » Knowledge Base » Application Notes
2011/11/13
02:18:49 PM
Imagine 3D Brochure
» Support » Product Documentation » Specification Sheets and Brochures
2011/11/11
07:07:24 PM
InspectionWare Quick Start Guide
Downloadable version of Quick Start Guide
» Support » Product Documentation » Manuals and Training Materials
2011/11/11
01:29:10 PM
Microsoft .NET 4.0 Framework
An install package containing Microsoft .NET 4.0 Framework for 32 and 64 bit Windows operating systems.
» Support » Downloads » Windows Components
2011/08/17
06:10:15 PM
Backup and Restore Utility for Galil 40x0 Motion Controllers running under Windows 64 bit OS
This document describes how to install and use Galil's back-up and restore software utility for 40x0 series controllers running under Windows 64 bit OS Galil Tools v.7 drivers. A beta version of Galil's back-up software is appended for download.
» Support » Downloads » Galil Motion Control Utilities
2011/04/29
02:35:35 PM
Imagine3D version 2.7.0.9 Full Web Install
Single File Installation Package - Password Required
» Support » Downloads » Installers and Service Packs
2011/04/20
02:25:27 PM
Imagine3D Help System Application for Windows 7
Windows update to allow the viewing of legacy .hlp files
» Support » Downloads » Installers and Service Packs
2011/03/03
10:14:51 AM
Hardware Drivers for Winspect 6.x versions
This article lists the appropriate drivers for popular motion control and instruments hardware running under Winspect 6.x and Windows XP operating systems.
» Support » Knowledge Base » Hardware Support
2010/12/23
05:04:27 PM
Drivers for NDT Solutions RapiDAQ-PRX
RapiDAQ driver V1.0.5.1 installer for Win98, WinMe, Win2000, and WinXP
» Support » Downloads » Drivers
2010/12/08
11:35:19 AM
Socomate USPC3100 drivers and utilities version 6.4.5.5
» Support » Downloads » Drivers
2010/11/11
02:31:07 PM
Imagine3D showcase movie
A showcase of important features of Imagine3D
» Support » Product Documentation » Specification Sheets and Brochures
2010/05/25
03:59:10 PM
Imagine3D Tutorial Videos
Set of tutoria lmovies showing the main features of Imagine3D software
» Support » Product Documentation » Manuals and Training Materials
2010/05/25
03:54:42 PM
Imagine3D version 2.7.0.8 Full Web Install
Single File Installation Package - Password Required
» Support » Downloads » Installers and Service Packs
2010/05/05
10:52:16 AM
U3D Simulation component of InspectionWare
Windows installer for the U3D Simulation component of InspectionWare
» Support » Downloads » Add-ons
2010/03/04
11:39:46 AM
InspectionWare sample workspaces and sample data
Installable InspectionWare sample workspaces and sample data.
» Support » Downloads » Samples
2010/03/04
11:37:13 AM
InspectionWare CDF Data File Component
InspectionWareCDFSetup.msi contains dll's to allow the user to read MultiZone data files (*.nc?) into InspectionWare.
» Support » Downloads » Add-ons
2010/03/04
11:33:40 AM
Acquisition Logic .NET2 Drivers 2.3.27 for InspectionWare
Downloadable Windows Installer package containing Acquisition Logic .NET Drivers for InspectionWare. Includes signed drivers for 64-bit Windows
» Support » Downloads » Drivers
2010/02/12
03:03:01 PM
Winspect 6.0.25.153 full installation program
Full Wispect 6.0.25.153 Installer package
» Support » Downloads » Installers and Service Packs
2009/11/18
02:24:25 PM
Imagine3D viewer installation
Free viewing program for sharing Imagine3D files.
» Support » Downloads » Installers and Service Packs
2009/11/18
02:22:16 PM
Imagine3D BETA version 2.7.0.6 installer.
Full installer of BETA release of Imagine3D.
» Support » Downloads » Installers and Service Packs
2009/11/18
02:19:17 PM
 
  Print Email page Share